MF Property Maintenance

Telephone 01977 647637 Mobile 07786 731591

Timber Treatments for Dry Rot, Wet Rot and Woodworm.

Dry Rot

The wood destroying fungus, Serpula lacrymans, is commonly known as dry rot. However, the name ‘dry rot’ might be considered rather inappropriate since like all wood destroying fungi it requires water for germination, growth and survival. Indeed, water/dampness is the fundamental need of all wood destroying fungi plus, of course, a food source (wood); without either the fungus ceases to grow and dies.

Symptoms of Dry Rot:

Cuboidal cracking of the wood, fruiting bodies, White fluffy cotton wool-like growth, thick tubular-like growth

The Cause of Dry Rot:

As in all rot problems the cause is due to moisture in the wood either from a leak or timbers being in contact with damp masonry, once the wood becomes damp this is all that’s needed (food and water) for the spores to germinate and start attacking the timber and walls around the source.

The Treatment of Dry Rot:

The primary and most important aspect of treating dry rot is to eradicate the source of moisture in the wood, the source can come from a leak which must be stopped before any treatment can commence or from the wood being in contact with damp masonry. Once the source has been eliminated all affected timbers and plaster must be removed up to a maximum of 1 meter past the last signs of rot. The walls must then be chemically irrigated and specialist re-plastered, when all walls and plates have been treated then replace joists and boards with tanalised pre-treated timber.

Wet Rot

Unlike dry rot there are many different types of wet rot, so its not always easy to distinguish which type of fungi is causing the problem. But fortunately the treatment for all wet rots are usually the same and far less difficult to control than dry rot.

Symptoms of Wet Rot:

The wood breaking down into very coarse fibres, slightly bleached in colour, tufts of the tawny coloured mycelium can be seen in the cracks of the decaying wood, fruiting bodies can appear but less likely as in dry rot.

The Cause of Wet Rot:

As in all rots the cause is due to moisture in the wood. In wet rots usually the wood is in contact with damp masonry, thus rotting skirting boards are usually the first signs.

The Treatment of Wet Rot:

The primary and most important aspect of treating dry rot is to eradicate the source of moisture in the wood, the source can come from a leak which must be stopped before any treatment can commence or from the wood being in contact with damp masonry. Once the source has been eliminated all affected timbers and plaster must be removed up to a maximum of 1 meter past the last signs of rot. The walls must then be chemically irrigated and specialist re-plastered, when all walls and plates have been treated then replace joists and boards with tanalised pre treated timber.

Woodworm

There are many types of wood boring beetle, but all cause the same problem if left untreated. The usual sign that wood is suffering from woodworm is the formation of bore holes, these holes indicate that the wood is either under attack from the beetles or has previously been the subject of an outbreak.

Once it has been established that the beetles are active (and this is not always the case) all rotten wood should be removed and replaced with pre treated timber, all remaining sound wood should then receive a chemical insecticide spray.

MF Property Maintenance. Roofing, Damp proofing, timber treatment, pointing, basement conversions, overcoming condensation problems and more.

Serving customers in Wakefield, Pontefract, Castleford, Hemsworth, South Elmsall, South Kirkby, Normanton, South Milford, Brotherton, and surrounding towns and villages in West Yorkshire.